Vibration motor out of the cable to withstand vibration, so should be used for heavy-duty four-core cable, near the cable exit is not allowed to suddenly bend, to have a greater than the cable diameter of 8-9 times the bending radius, and then fixed to the stationary machine or frame. The distance is about 0.6 meters to 0.9 meters. The clamp of the fixed cable should be cushioned with soft insulating material to avoid friction damage to the cable. The grounding wire of the four-core cable is connected with the grounding screw in the junction box, and the other end must be grounded reliably. Small vibrating motor, no junction box on the casing, the use of heavy-duty three-core cable directly from the internal wiring. A grounding screw is installed near the bottom foot of the motor and must be grounded reliably when used.
Vibration Motor Outlet cable is easily damaged parts, often due to vibration friction damage, resulting in motor missing phase operation, damage motor. Users should always check the status of cables, such as wear and tear should be replaced in a timely manner the same type of cable.
Vibration source three-phase asynchronous motor for all kinds of vibration machinery general excitation source. such as vibrating feeder, vibrating conveyor, vibrating dryer, vibrating ore-discharging machine, vibrating sand-falling machine, vibrating sieving machine, the vibration of the silo and so on. Can be widely used in PCB electroplating equipment, electricity, building materials, grain, coal, mining, metallurgy, chemical industry, light industry, foundry, railways, cement, ports and other unemployed, by the vast number of users welcome.